FILING (4) Pottery plate designs.
Plates are filed in two separate sections, one for the centers and one for the borders, as they can be used with one another. Photos are important for borders, as to recognize drawings with no subject, is more difficult. The borders have to be filed with numbers and the centers with number and subject, birds, hunters etc. As designs are pounced on transparent paper, to recognize them is very difficult, even if they are classified by object and size. There might be up to 50 different designs all with the same subject e.g. flowers.
This is particularly hard for people who have just started to work and do not know the designs, which is why filing and classifying them in your computer with colored photos is important and makes it easier to choose a design. It allows you to run through a large selection quickly, seeing all the different ones.
The next illustrations show the three sections, the plate finished with the center and the border design prepared for use. The last two, show how to file plate borders and centers, here are only a few shown, one page can hold about eight.
FILING PLATE DESIGNS:
Coding plates: PB, Nº 10, C3, B7.
Coding translated: PB =Plates Basket, nº10= Number 10, Center 3, Border 7.
Then, in your file under their code, you should have the information on them; the sizes, if they are pounced, what type of paper, etc. Each part should be marked clearly, with its code and size and if you keep them in an organized way, they will prove easy to find.
FILING PLATE BORDERS:
Coding borders: B-1. 20, 37 cms.
Coding translated: B-1= Border 1
Note; 20 and 37 refer to the diameter of the plates the border has been prepared for.
FILING PLATE CENTERS
Coding centers: CB-1= 20, 31cms.
Coding translated: Center Boat = 1
Note: 20 and 31 refer to the diameter of the plates the centers have been prepared for.
The next section; File – Filling (5) pottery tile designs